Using the USB Connection Kit
Using the supplied USB Connection Kit, you can import still pictures
card
into your personal computer.
1 1 1 1
Install the supplied USB driver.
2 2 2 2
Set the Movie Camera to Card Playback Mode.
3 3 3 3
Set the Movie Camera to Still Playback Mode.
4 4 4 4
Connect the supplied USB Cable to [DIGITAL (to USB)]
Socket
≥It enters PC connection mode.
≥The USB Connection Kit can be used with Windows98 Second Edition/Me/
2000.
≥Use the AC Adaptor as power source for the Movie Camera. (The Card or
its contents may be destroyed if battery power is lost while transmitting
data.)
≥Mode cannot be changed in PC connection mode by sliding the [OFF/ON/
DIGITAL (to USB)
MODE] Selector Switch.
≥For more details on the operating environment, installation, connections,
and procedures, please refer to USB Connection Kit's operating
instructions.
~~~~~~~~~~~~~~~~~~~~~~~~~
Personal Computer Connection Kit
Using the optional Personal Computer Connection Kit, you can import still
pictures into your personal computer.
Use the Digital Still Picture Terminal [D.STILL PICTURE]
the Personal Computer Connection Kit.
≥When recording, be careful not to cut off the Time Code from the start of the
tape.
≥Mega-Pixel picture cannot be imported. The picture size is [640a480].
≥MPEG4 data or Voice data cannot be used.
≥For more details on the operating environment, connections, and
procedures, please refer to Personal Computer Connection Kit's operating
S-VIDEO
IN/OUT
instructions.
1
D.STILL
PICTURE
¥
on the
1
1
when using
43