Digital Zoom Function; Image Stabilizer Function; Fade In/Out Functions - Panasonic NV-EX21EG Operating Instructions Manual

20tW
D.ZOOM
1
1
20

Digital Zoom Function

W.B./SHUTTER/IRIS/
1
This function is useful when you want to record close-up shots of subjects
MF/VOL/JOG
located beyond a normal zoom range of 1k to 10k magnification. With the
2 1
Digital Zoom Function, you can select a magnification of 20k or even to
PUSH
100k.
1
1
2
W
3
4
T
2
To Cancel the Digital Zoom Function
Set [D.ZOOM] on the [CAMERA SETUP] Sub-Menu to [OFF].
≥As the magnification of digital zoom increases, the quality of image may
deteriorate.
≥White balance cannot be set in the digital zoom range.
T
≥For other notes concerning this item, see page 46.
~~~~~~~~~~~~~~~~~~~~~~~~

Image Stabilizer Function

If the Movie Camera might be shaken while recording, you can use this
function to stabilize the image.
≥If the Movie Camera shakes too much, this function may not be able to
stabilize images.
1
W.B./SHUTTER/IRIS/
1
MF/VOL/JOG
2 1
To Cancel Image Stabilizer
PUSH
1 Set [SIS] on the [CAMERA SETUP] sub-Menu to [OFF].
≥For other notes concerning this item, see page 46.
~~~~~~~~~~~~~~~~~~~~~~~~

Fade In/Out Functions

Fade In
Fade In brings out images and sounds gradually from a black screen at the
beginning of a scene.
1
2
3
Fade Out
2
Fade Out causes images and sounds to disappear gradually, leaving a black
screen at the end of a scene.
1
1, 3
2
3
2
≥Fade in/out finction cannot be used in MPEG4 Recording Mode (l 35),
Photoshot Recording Mode, Still Picture Mode (l 25).
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>
[D.ZOOM] >> [20t] or [100t].
≥20k: Digital zooming to 20k
≥100k: Digital zooming to 100k
Push the [W/T] Zoom Lever towards [W] or towards [T] to
zoom in or out.
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [SIS] >>
[ON].
1
≥The [[] Indication
appears.
1
Keep pressing the [FADE] Button during the Recording
Pause Mode.
≥The image fades out gradually.
When the image is completely gone, press the Recording
Start/Stop Button to start recording.
Release the [FADE] Button about 3 seconds after starting
recording.
≥The image reappears gradually.
2
Keep pressing the [FADE] Button while recording.
≥The image fades out gradually.
When the image is completely gone, press the Recording
Start/Stop Button to stop recording.
Release the [FADE] Button.