Formatting A Card; Writing Printing Data On A Card - Panasonic NV-EX21EG Operating Instructions Manual

2, 3, 4
2
42

Formatting a Card

If a Card becomes unreadable by the Movie Camera, formatting it may make
it reusable. Formatting erases all the data recorded on a Card.
W.B./SHUTTER/IRIS/
1
MF/VOL/JOG
2 1
1
Set [CARD FUNCTIONS] >> [CARD EDITING] >> [CARD
PUSH
FORMAT] >> [YES].
≥Since a confirmation message appears, select [YES] and formatting will be
carried out.
1
≥When the formatting is completed, the screen becomes white.
≥It may not be possible to use the Card which was formatted using this Movie
Camera on another unit. In this case, format the Card on the unit which will
be using the Card. Take steps to ensure that valuable files are stored on the
personal computer, etc. as well before proceeding.
~~~~~~~~~~~~~~~~~~~~~~~~

Writing Printing Data on a Card

(DPOF Setting)
W.B./SHUTTER/IRIS
MF/VOL/JOG
DPOF Setting Printing data (DPOF Settings), such as the number of images
2 1
to be printed, can be written to the Card. "DPOF" means Digital Print Order
PUSH
Format.
1
1
Slide the [PICTURE/MPEG4/VOICE] Switch to [PICTURE].
PICTURE MPEG4 VOICE
2
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
CARD
MODE
[DPOF SETTING] >> [YES] >> [VARIABLE].
2, 5
≥To print all pictures one at a time, select [ALL 1]. When all images are
3
Select a desired picture
≥The number of prints set by DPOF is displayed.
≥The selected image is marked with a frame.
4
Turn the [PUSH] Dial and select the number of pictures to be
printed, and press the [PUSH] Dial.
≥When DPOF setting is set to 1 or more files, the [µ] Indication
1
5
Repeat Step 3 and 4 and press the [MENU] Button when the
setup is completed.
To Verify DPOF Setting
Select [VERIFY] in Step 2 above. The pictures for which 1 or more print is set
in DPOF are played back continuously.
≥The number of prints can be set from 0 to 99.
≥Perform the DPOF Settings with your own Movie Camera in use.
≥Verifying the DPOF Settings may take a little time. Wait until the [ACCESS]
Lamp goes out.
not printed, select [ALL 0].
appears in white. When both DPOF setting (is set to 1or more files) and
Slide Show setting are completed, the [µ] Indication
blue.
and press the [PUSH]
1
2
Dial.
2
appears in