Advertisement
6.3.2 Communication Manager
A SIP Entity must be added for the Communication Manager. To add a SIP Entity, select SIP
Entities on the left and click on the New button (not shown) on the right. The following screen
is displayed. Fill in the following:
Under General:
Name:
FQDN or IP Address:
Type:
Location:
Time Zone:
Defaults may be used for the remaining fields. Click Commit to save the SIP Entity definition.
JAO; Reviewed:
SPOC 9/20/2011
A descriptive name.
IP address of the signaling interface (e.g., C-LAN board)
on the telephony system.
Select CM.
Select the location defined previously.
Time zone for this location.
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
17 of 38
ClearOneVH20-SM
Advertisement
