Initial Settings; Switching Operating Sound On Or Off (Beep); Turning Dvd Palmcorder Off Automatically (Power Save) - Panasonic DVD Palmcorder VDR-M30PP Instruction Manual

Initial Settings

Switching Operating Sound On or Off (Beep)

This DVD Palmcorder will emit sound when the power switch is changed over, the REC button is pressed,
or other operations are engaged. If you do not need operating sound, you can switch it off.
Setting
On Beep is heard
Off No beep is heard
1
Press the MENU button,
choose "Beep" on the
"Initial Setup" menu
screen, and then press the
button.

Turning DVD Palmcorder Off Automatically (Power Save)

This DVD Palmcorder is equipped with power save function. Specify "Power Save: On": If the DVD
Palmcorder is left in the recording pause status without being operated for 5 minutes, it will automatically
turn off to prevent the battery pack from discharging needlessly.
Setting
On To engage power save
Off To cancel power save
1
Press the MENU button,
choose "Power Save" on
the "Initial Setup" menu
screen, and then press the
button.
2
Select "On" or "Off", and
then press the
3
Press the MENU button to end the setting.
94
Content
I n i t i a l S e t u p
Be e p
Po w e r S a v e
R e c o r d LED
L a n g u a g e
Reset
ENTER RETURN
Content
I n i t i a l S e t u p
Be e p
Po w e r S a v e
R e c o r d LED
L a n g u a g e
Reset
ENTER RETURN
button.
2
Select "On" or "Off", and then press the
button.
3
Press the MENU button to end the setting.
:
Note
The "Beep" setting will be stored in memory even when the
DVD Palmcorder is turned off.
On
Of f
RAM
:
Note
•
To turn the DVD Palmcorder on again from automatic off
activated by the power save function, set the power
switch to "POWER OFF", and then set it to "

" PHOTO" or "
•
The Power Save setting will not appear in the on-screen
information display.
•
The Power Save setting will be stored in memory even
when the DVD Palmcorder is turned off.
On
Of f
RAM

PHOTO"

VIDEO",