Panasonic DVD Palmcorder VDR-M30PP Instruction Manual page 155

Message
Scene without control
info. Update control
information?
Scenes over limit.
Cannot add scene.
Scenes over limit.
Cannot divide scene.
Scenes over limit.
Cannot move scene.
Stop processing
There was no scene
which can be deleted.
This card cannot be
used.
Please replace card.
This disc cannot be
used. Please replace
disc.
This disc is recorded by
the PAL system. Please
replace disc.
Top scene cannot be
divided.
UNFORMAT DISC
Use AC adapter/
charger.
Cause & Troubleshooting
•
This message may appear when a disc edited on a device other
than this DVD Palmcorder is to be used. In this case, choose
"YES" on the verification screen. This DVD Palmcorder will make
the disc playable and display the Disc Navigation screen
normally.
•
This message may appear when a disc is used on which scenes
with different recording dates were combined on this DVD
Palmcorder. If you choose "YES", the combined scene will be
divided and the Disc Navigation screen will appear normally. If
you choose "NO", the combined scene will not be divided and the
Disc Navigation screen will appear normally: In this case,
however, this message will appear each time the DVD
Palmcorder is turned on.
The number of scenes entered in play list has reached the limit that
can be entered.
Delete several scenes.
The number of entered scenes has reached the limit that can be
entered.
Delete several scenes.
This message will appear if you try to move a scene when the
number of scenes has already reached the registrable limit.
The button was pressed to stop processing of multiple scenes.
This message will appear if you try to delete multiple scenes on Disc
Navigation when all the selected scenes have been locked.
Release the lock on scenes before executing deletion.
The card cannot be used in this DVD Palmcorder: Use another card.
A disc that cannot be used on this DVD Palmcorder has been
loaded. Check the type of disc.
This DVD Palmcorder can use only discs recorded on the NTSC
system. A disc recorded on the PAL system cannot be used on this
DVD Palmcorder.
Division is not possible at the start of scene.
The disc is not initialized or it is damaged.
If this message appears, be sure to initialize the disc on this DVD
Palmcorder before using it.
Reinitializing even a disc used on this DVD Palmcorder may be
necessary (initializing will erase all recorded contents on disc). If
this message appears, try to initialize the disc. If the same message
still appears, the disc may be damaged: Use another disc.
See *2 on page 156.
Finalization is not possible when the DVD Palmcorder is powered
by a battery pack: Use the AC adapter/charger for finalization.
Reference
page
130
119, 124
110, 119
108, 119

103, 112
27
25

110
129
78
42, 131
155