Exiting Disc Navigation; Playing Back From Disc Navigation Screen - Panasonic DVD Palmcorder VDR-M30PP Instruction Manual

Exiting Disc Navigation

1
Press the DISC NAVIGATION button.
Disc Navigation will be terminated and the
DVD Palmcorder will enter the recording pause
status.
You can also press the
Navigation.

Playing Back from Disc Navigation Screen

1
Press the DISC NAVIGATION button.
2
Use the joystick to select the desired scene.
The selected scene will be framed: This is called
a "cursor".
A l l Pr og r ams 0 01 / 014
PLAY RAM
●When playback ends:
The DVD Palmcorder will
enter the playback pause
status at the last image of last
scene.
Pressing the or DISC
NAVIGATION button will
restore the Disc Navigation
screen.
When the playback pause status continues for as
long as 5 minutes, the Disc Navigation screen will
automatically be restored.
●Playing back stills
A still will be displayed for approx. 3 seconds.
When playing back stills on card, playback will
stop after each still playback.
button to end Disc
A l l Pr og r ams
Up or Down
PLAY
Left or Right
Playback pause
A l l Pr og r ams 0 01 / 014
PLAY RAM
3
Press the button.
Playback will start from the selected scene.
:
Note
Tilting the joystick to left or right will move the cursor to
the preceding or following scene.
Tilting it up or down will move to preceding or following
page.
0 07 / 014
RAM
:
Note
•
Press the button to temporarily stop playback.
Pressing again will start from that point.
•
If you press the button after playback of the last
scene on disc finishes, playback will start again from the
beginning of disc.
•
Pressing the button will always restore the Disc
Navigation screen.
•
With playback on Disc Navigation, you can select desired
scenes for playback and skip unnecessary scenes.
•
When playing back a still with a large number of pixels on
card, "Playback." will appear, and it will take some time for
the still to appear.
0 : 0 0 : 0 0
REM 3 0 MIN
8 : 0 0 AM
FINE S E P 3 0 2 0 0 3
99