Setups; Setting Up The Dvd Palmcorder; Attaching Adjuster (Securing Tab); Holding Dvd Palmcoder - Panasonic DVD Palmcorder VDR-M30PP Instruction Manual

Setups

This section explains preparations for recording - setting up the DVD Palmcorder and battery pack.

Setting Up the DVD Palmcorder

Attaching adjuster (securing tab)

1
Pass the belt through the attachment part of
DVD Palmcorder.

Holding DVD Palmcoder

To use as a Grip Belt
Insert your right hand from the bottom of DVD Palmcorder up to the base of your thumb.
Put your hand in a position where you can easily operate the REC button and the Zoom lever.
Adjust the length of grip belt so that the DVD Palmcorder is stable when you press the REC button with
your thumb.
1
: :
Note Note
Do not adjust the grip belt while holding the DVD
Palmcorder: Doing this could cause the DVD Palmcorder
to fall and be damaged.
34
2
2
Pass the belt through the adjuster (securing tab).
3
Adjust the length of hand strap.
3
:
Caution
Do not lift the DVD Palmcorder by holding the
viewfinder or LCD monitor: If the viewfinder or LCD
monitor comes off, the DVD Palmcorder will fall.