Initial Settings; Switching Operating Sound On Or Off (Beep); Turning Dvd Video Camera Off Automatically (Power Save) - Panasonic VDR-M50PP User Manual

Initial Settings

Switching Operating Sound On or Off (Beep)

Setting
On
Off
1
Press the MENU button,
choose "Beep" on the
"Initial Setup" menu screen,
and then press the A
button.

Turning DVD Video Camera Off Automatically (Power Save)

Setting
On
Off
1
Press the MENU button,
choose "Power Save" on the
"Initial Setup" menu screen,
and then press the A
button.
2
Select "On" or "Off", and
then press the A button.
3
Press the MENU button to end setting.
92
Beep is heard when the power switch is turned on/off, the REC button is pressed,
etc.
No beep is heard.
I n i t i a l S e t u p
Be e p On
Po w e r S a v e Of f
R e c o r d LED
L a n g u a g e
Reset
ENTER RETURN RAM
To engage power save. If the DVD Video Camera is left in recording pause mode
without being operated for 5 minutes, it will automatically turn off to prevent the
battery from discharging needlessly.
To cancel power save.
I n i t i a l S e t u p
Be e p
Po w e r S a v e On
R e c o r d LED Of f
L a n g u a g e
Reset
ENTER RETURN RAM
Contents
2
Select "On" or "Off", and then press the A button.
3
Press the MENU button to end setting.
:
Note
The "Beep" setting will be stored in memory even when the
DVD Video Camera is turned off.
Contents
:
Note
•
To turn the DVD Video Camera on again from automatic
off activated by the power save function, set the power
switch to "OFF", and then set it to "
•
The Power Save setting will not appear in the on-screen
information display.
•
The Power Save setting will be stored in memory even
when the DVD Video Camera is turned off.
123
", " " or " ".