Table of Contents
Advertisement
Operating Instructions
5.
Set the parameters and click [OK].
Proxy Server Settings Page
Setting
Proxy Server
Address and Port
Proxy User Name
and Proxy
Password
Note
Normally when the camera cannot access a proxy server, an error message is
displayed (see page 20), but there are cases when an error message is not
displayed with a proxy server error. In this case, the camera's image is displayed
as a connection error (default is blue; see page 80).
18
Enter the IP address of proxy server and port number.
Enter them after asking your administrator.
•
Enter the alphanumeric characters. (Enter only the
numeric character for port number.)
•
Proxy server does not support IPv6 connection.
Set the IPv4 address or URL that you registered by IPv4
domain name service.
Enter the user name and password for the proxy server, if
required. Enter them after asking your administrator.
•
Enter the alphanumeric characters.
Description
Advertisement
Table of Contents
