Table of Contents
Advertisement
Message
Enter a number in one-byte
character in "Port".
Failed to connect.
Access authentication can not be
done.
Confirm the user name and
password.
The server connection is closed.
Do you want to reconnect?
The number of connections has
exceeded the limit. Wait for a
moment and try again.
Another administrator changed the
settings. Wait for a moment and try
again.
The settings have been changed.
Information is being updated now.
Please wait.
Another administrator changed the
settings. Restart the program.
Cause and Remedy
→ Follow the instruction message.
• If a connection to the remote server cannot be
established.
→ Confirm that the remote server is properly
running.
→ Confirm the new connection settings.
• If remote client access cannot be
authenticated at the remote server.
→ Confirm that the remote server is properly
running.
→ Follow the instruction message.
• Connection to the server was lost due to
network congestion (Remote client).
→ Follow the instruction message.
• A remote client has connected to the server
while you were trying to connect to the remote
server (Remote client).
→ Follow the instruction message.
• Settings were applied while you were
configuring remote server settings (Remote
client).
→ Follow the instruction message.
• Settings were changed during remote access.
You will need to reload any modified
information (Remote client).
→ Follow the instruction message.
• Settings were changed while loading ncr3.exe
on the remote server (Remote client).
→ Follow the instruction message.
Operating Instructions
153
Advertisement
Table of Contents
