Table of Contents
Advertisement
Message
No matching images were found.
Conversion/Copying
"Start Time" should be within the
recording time.
Set the "Start Time" so that it
comes before the End Time.
Set the "End Time" so that it
comes after the Start Time.
"End Time" should be within the
recording time.
Conversion interval should be
between 1 and (the number of
images - 1).
Conversion interval should be
between 1 and (end time - start
time [seconds]).
Conversion interval should be
between 1 and 3600.
The recorded images could not be
found. Search the recorded
images and try again.
A write error has occurred.
Conversion is canceled.
Cannot convert images that are
being recorded.
Cause and Remedy
• The recorded images could not be found.
• The start time is not within the recording time.
→ Follow the instruction message.
• The start time comes after the end time.
→ Follow the instruction message.
• The end time comes before the end time.
→ Follow the instruction message.
• The end time is not within the recording time.
→ Follow the instruction message.
• The frequency is not between 1 and (the
number of images - 1), or the space was blank.
→ Follow the instruction message.
• The number is larger than the time period
between the start time and end time, or the
space was blank.
→ Follow the instruction message.
• The image is recorded for more than 1 hour,
but the converted interval is not between 1 and
3600.
→ Follow the instruction message.
• There is no recorded images.
→ Search the recorded images and try again.
• An error has occurred in conversion or the
converted file has been opened in another
application.
→ Search the recorded images and try again.
→ Close other applications and try again.
• You clicked cancel button while converting the
image.
• You cannot convert a recorded image that
does not last more than one minute from when
it started recording.
Operating Instructions
145
Advertisement
Table of Contents
