Table of Contents
Advertisement
2.10 Specifications
The recommended number of cameras that you can register, monitor and record
simultaneously differs depending on the specifications of your computer.
See Table 1 (see page 132) and Table 2 (see page 133) for details.
Note
• Table 1 shows the required specifications for a PC when using the
BB-HCM515A network camera with the following settings: Image quality:
Standard; Audio recording setting: Audio and Image; Multi-monitoring frame
rate: 2 frames/1 second; Multi-playback frame rate: 2 frames/1 second;
Transparency of Image Information: Not specified.
Table 2 shows the required specifications for a PC when using the
BB-HCM515A network camera with the following settings: Image quality:
Standard; Audio recording setting: Audio and Image; Multi-monitoring frame
rate: not specify; Multi-playback frame rate: not specify; Transparency of
Image Information: Not specified.
However, the values are only estimates, and actual values will differ
depending on the recording method and system configuration.
• If you use other applications while operating this software, the CPU will have
a higher load, and performance of this software will be affected. For best
results, do not run other software while operating this software.
• When using the MPEG-4 format, the multi-monitoring frame rate and CPU
usage will be higher, possibly resulting in unstable/unreliable performance.
When using MPEG-4, set a frame rate for the multi-monitoring page.
Operating Instructions
131
Advertisement
Table of Contents
