Juniper SRX240 Hardware Manual page 37

Copyright © 2015, Juniper Networks, Inc.
Table 10: SRX240 Services Gateway Front Panel Components (continued)
Component Description
Alarm LED The Alarm LED has the following
indicator colors:
Red and steadily on indicates a
major alarm.
Amber and steadily on indicates
a minor alarm.
Off indicates that the device is
starting up.
NOTE:
running, if the Alarm LED is off, it
indicates that no alarms are present
on the device.
Power LED The Power LED has the following
indicator colors:
Green and steadily on indicates
that the device is functioning
normally.
Amber and steadily on indicates
that the Power button has been
pressed and quickly released.
Off indicates that the device is
not receiving power.
HA LED The HA LED has the following
indicator colors:
Green and steadily on indicates
that all HA links are available.
Red and steadily on indicates that
the HA links are not working as
expected.
Amber and steadily on indicates
that some HA links are not
working as expected.
Off indicates that HA is not
enabled.
Mini-PIM LED Each Mini-Physical Interface Module
(Mini-PIM) LED has the following
indicator colors:
Green and steadily on indicates
that the Mini-PIM is functioning
normally.
Off indicates that the Mini-PIM is
not present or not detected by the
device.
When the system is up and
Chapter 3: Chassis Description
Usage
The Alarm LED can be used to
gather information on major or minor
alarms or to determine whether the
device is functioning normally.
The Power LED can be used to
determine whether the device is
receiving power.
The HA LED can be used to
determine whether the chassis
clustering is enabled on the device.
The Mini-PIM LED can be used to
determine whether the Mini-PIM is
present and detected by the device.
19