Memory Options - HP ProLiant DL180 Gen9 User Manual

To determine which fan blanks need to be removed to install the additional fans, see "Fan population
6.
guidelines (on page 80)."
Remove the fan blank.
7.
Install the fan.
8.
Connect the fan cable to the system board.
9.
If removed, install the PCI riser cage
10.
Install the air baffle (on page 29).
11.
Install the access panel (on page 25).
12.
Do one of the following:
13.
Slide the server into the rack.
o
Install the server into the rack
o
Power up the server (on page 20).
14.

Memory options

("Install the PCI riser
("Installing the server into the
cages" on page 27).
rack" on page 35).
Hardware options installation 81