M.2 Ssd Enablement Option - HP ProLiant DL180 Gen9 User Manual

Install the Smart Storage Battery on the server.
7.
Install the access panel (on page 25).
8.
Do one of the following:
9.
Slide the server into the rack.
o
Install the server into the rack
o
Power up the server (on page 20).
10.

M.2 SSD enablement option

For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
To install the component:
Power down the server (on page 20).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 20).
o
Remove the server from the rack (on page 22).
o
Remove the access panel (on page 24).
4.
Remove the PCI riser cage
5.
Do one of the following:
6.
("Installing the server into the
("Remove the PCI riser
rack" on page 35).
cages" on page 26).
Hardware options installation 68