HP ProLiant DL180 Gen9 User Manual page 76

Remove the clear processor socket cover. Retain the processor socket cover for future use.
8.
CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY
DAMAGED. To avoid damage to the system board, do not touch the processor or the
processor socket contacts.
Install the processor. Verify that the processor is fully seated in the processor retaining bracket by
9.
visually inspecting the processor installation guides on either side of the processor. THE PINS ON
THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED.
Close the processor retaining bracket. When the processor is installed properly inside the processor
10.
retaining bracket, the processor retaining bracket clears the flange on the front of the socket.
CAUTION: Do not press down on the processor. Pressing down on the processor may cause
damage to the processor socket and the system board. Press only in the area indicated on the
processor retaining bracket.
Hardware options installation 76