HP ProLiant DL180 Gen9 User Manual page 57

Remove the primary PCI riser cage
5.
If the 8-bay LFF hot-plug drive cage is currently connected to an HBA, remove the HBA from the
6.
primary PCI riser cage.
If the 8-bay LFF hot-plug drive cage is currently connected to the Mini-SAS connectors on the
7.
system board, do the following:
Disconnect the existing Mini-SAS cables from the drive backplane and the Mini-SAS connectors
a.
on the system board.
Release the Mini-SAS cables from the right front chassis cable clip.
b.
Install the storage controller:
8.
Identify the riser slot compatible with the new option, and then remove the cover opposite from
a.
that slot.
("Remove the PCI riser cages" on page 26).
Hardware options installation 57