HP ProLiant DL180 Gen9 User Manual page 48

Install the storage controller. Verify that the board is firmly seated in the slot.
b.
For more information about the integrated storage controller and its features, select the relevant user
documentation on the Hewlett Packard Enterprise website
(http://www.hpe.com/info/smartstorage/docs).
Connect the 630-mm Mini-SAS Y-cable:
11.
Connect the common end of the Mini-SAS Y-cable to the controller option.
a.
Install the primary PCI riser cage
b.
Route the Mini-SAS Y-cable along the side of the system board towards the front chassis, and
c.
then connect the cable to the drive backplane.
("Install the PCI riser cages" on page 27).
Hardware options installation 48