Long Custom Size Paper On The Bypass Tray - Toshiba E-Studio 5506AC Paper Preparation Manual

1.LOADING PAPER
 Long custom size paper on the bypass tray
In the printing function, you can also print the paper longer than the maximum standard paper size by setting it as a
custom size. For paper size which can be set, refer to the Specifications Guide. To learn how to set the custom size,
refer to the Printing Guide.
Place paper with its print side down on the bypass tray.
1
Hold the knob and align the side guides to the paper length.
2
Check that there is no gap between the paper and the side guides.
3
If the gap is too wide, it could cause paper misfeeding, or the paper size could not be correctly detected.
Between the paper and side guides ("A" in the figure):
Make sure there is no gap. (0.5 mm (0.02") or less on one side, 1.0 mm (0.04") or less in total) However, if paper
misfeeding occurs, make a gap.
Select the bypass tray during the operation for copying or printing and specify the paper size and
4
thickness.
For details for the operation for copying or printing, refer to the Copying Guide or Printing Guide.
28 Loading Paper on the Bypass Tray
A
A