Preparation - Registering Paper Size Placed On Bypass Tray - Toshiba e-STUDIO206 Operator's Manual

Preparation - Registering paper size placed on bypass tray

Register the size of the paper into the equipment in advance.
The registration procedure for other paper sizes is different from the standard sizes (A3, A4, A4-
R, A5-R and B4).
P.52 "Registering other standard sizes"
Registering standard size (A3, A4, A4-R, A5-R, B4)
In this section, the registration procedure is described with A4 size paper placed on the bypass
tray as an example.
1
Press and hold the [COPY] and [DRAWER] buttons simultaneously
for more than two seconds.
"Fnc" appears on the LED display.
2
Press the [DRAWER] button several times until the lamp of the
bypass tray is lit.
Using Bypass Tray 51