Adjusting T-Arm Height
1.
Remove the locking T-arm. Refer to Installing/Removing Locking
T-Arms on page 82.
2.
Loosen, but do not remove the height adjustment nut (A).
CAUTION
When performing STEP 3, DO NOT overtighten
adjustment screw, tighten only to 50 inch pounds
of torque. Otherwise, damage to the product will
occur.
3.
Slide the release button assembly (B) up or down the T-arm post
(C) to the desired position. Tighten the height adjustment nut to 50
inch pounds of torque.
4.
Reinstall the T-arm. Refer to Installing/Removing Locking T-Arms
on page 82.
5.
After re-installing the T-arm, ensure the adjustment nut does not
interfere with the wheel spokes. If interference occurs, loosen
adjustment nut and refer to STEP 3.
Part No 1167418
A
B
FIGURE 3
83
Invacare® MyOn™MyOn Jr Wheelchairs
11 ARMS
C
A
B
Adjusting T-Arm Height