Invacare MyOn User Manual page 37

Inspect/Adjust Monthly
Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged.

Replace if necessary.
 Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
 Wheel bearings are clean and free of moisture.
 Wheel locks do not interfere with tires when rolling.
 Wheel lock pivot point are free of wear and looseness.
Ensure all caster/wheel/fork/headtube fasteners are secure.

Ensure all hardware is tight.

Ensure hand grips are not loose.

Ensure casters are free of debris.

For 80° and 90° front riggings, check the mounting pin for excessive wear or damage. Replace mounting pin if worn or damaged.

Inspect front rigging mounting pin and hardware. Specifically, inspect the mounting screw that secures the mounting pin to the front rigging.

Tighten mounting screw if loose.
Inspect/Adjust Periodically
 Wheelchair rolls straight (no excessive drag or pull to one side).
 Arms are secure but easy to release and adjustment levers engage properly.
 Adjustable height arms operate and lock securely.
 Armrest pad sits flush against arm tube.
All fasteners on clothing guards are secure.

Seat and/or back upholstery have no rips.

Inspect adjustable angle back attaching hardware is securely tightened.

Part No 1167418
37
Invacare® MyOn™MyOn Jr Wheelchairs
5 SAFETY INSPECTION