Invacare MyOn User Manual page 50

6 WHEELCHAIR OPERATION
Removing
1. Pull the front rigging release lever (A).
2. If desired, rotate front rigging assembly (B) outward or inward.
3. Lift the front rigging assembly off of the mounting tube (C).
C
MyOn JR
Installing

For maintenance and/or adjustment procedures, refer to Troubleshooting and Maintenance on page 69.
Installing
1. Position the front rigging assembly (A) to the inside of the wheelchair frame.
2. Insert footrest mounting pin (B) into mounting tube (C).
3. Rotate the front rigging assembly towards the outside of the wheelchair until it locks into place.
Invacare® MyOn™MyOn Jr Wheelchairs
FIGURE 14 Installing/Removing Front Riggings - MyOn and MyOn Heavy Duty
A
50
B
Part No 1167418