Invacare MyOn User Manual page 38

5 SAFETY INSPECTION
 No excessive side movement or binding when rear wheels are lifted and spun.
 Inspect handrims for signs of rough edges or peeling finish.
 Inspect tires/casters for flat spots and wear.
 Check pneumatic tires for proper inflation (recommended tire pressure is listed on the side wall of the tire).
Wheel lock pivot point are free of wear and looseness.

Clean upholstery and armrests with mild soap and water.

Sealed bearings and axle nut tension are correct.

Wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop.

Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.

Wheel bearings are clean and free of moisture.

 Wheel locks are easy to engage.
 Clean quick-release axles with a Teflon lubricant.
 Ensure axles are free from dirt, lint, etc.
 Ensure roller bearings are free from dirt, lint, etc.
 Adjust wheel locks as tires wear.
Clean and wax all parts.

Ensure casters are free of debris.

Clean upholstery and armrests with mild soap and water.

Check that all labels are present and legible. Replace if necessary.

Invacare® MyOn™MyOn Jr Wheelchairs
38
Part No 1167418