Quantum dxi6701 Planning Manual page 13

Table 5 Cable Drops
DXi6701 and DXi6702 Cable Drops
Ethernet Cable Drops
DXi6701 and DXi6702 Specifications
DXi6701 (6 x 1GbE ports) - 1 to 6 1GbE Ethernet connections for NAS or
OST connectivity, replication, and remote management
DXi6702 (2 x 1GbE ports and 2 x 10GbE ports) - 1 to 2 1GbE Ethernet
connections and 1 to 2 10GbE Ethernet connections (optical or Twinax, see
below) for NAS or OST connectivity, replication, and remote management.
Note: Quantum recommends using the approved 5 meter Twinax cable
type that is shipped with the DXi6702 system. This cable is
compatible with Cisco 5000 Series Data Center Class switches.
Note: The 10GbE Copper (Twinax) cable options that Quantum provides do
not support all switches. Please note the supported switches during
the purchase-configuration process, and if the Twinax cables
supplied by Quantum are
will need to provide your own compatible Twinax cables from your
switch vendor. Be sure to have these available before the system
installation takes place.
10GbE Copper (Twinax) Cable
DXi6701 and DXi6702
not
compatible with your switch, then you
10GbE Optical Cable
13