Convert Unit; Chapter 6. Messages - UTStarcom CDM7026 Manual

TOOLS
• To start, press the Left Soft Key
• To stop a time period and continue measuring another one, press the Right Soft
Key [Check].
• To stop the second and continue measuring a third one, press the Right Soft
Key [Check].
• To measure up to ten time periods, repeat the above steps.
• To stop the stop watch, press the Left Soft Key
• To review the results, press /
• To reset it, press the Right Soft Key

CONVERT UNIT

To access the conversion tool:
1.
Press the OK Key [Menu], then press
Press "Convert Unit".
2.
Select the desired type of measurement, and then press the OK
Key .
• Length/Weight/Volume/Area/Temperature/Speed
3.
To change the unit type (for example: m, cm), press
use the keypad to enter the unit to convert. If you need to change
the lower unit of measure (the unit you are converting into),
press to highlight that area.
84
[Start].
[Stop].
.
[Reset].
for the "Tools" menu.
/ and
CHAPTER 6
MESSAGES
This chapter addresses voicemail and text messaging.
CHAPTER 6
MESSAGES
85