Erase Contacts; Reset Phone; Default Settings - UTStarcom CDM7026 Manual

SETTINGS

ERASE CONTACTS

To erase all the names and phone numbers in your internal contact list:
1.
Press [Menu], then press
Press "Security". Enter your password.
• The default Lock code is the last 4 digits of your phone number.
2.
Press "Erase Contacts".
3.
Select "Yes" or "No", then press the Left Soft Key

DEFAULT SETTINGS

Preference setting will be set to factory defaults. To reset the phone
settings to the factory defaults:
1.
Press [Menu], then press
Press "Security". Enter your password.
• The default Lock code is the last 4 digits of your phone number.
2.
Press "Default Settings".
3.
"Preference Settings Will Be Set To Factory Defaults" will appear.
Press the Left Soft Key [Next].
4.
Select "Yes" or "No", then press the Left Soft Key
64
for the "Settings" menu.
[Save].
for the "Settings" menu.
[Save].

RESET PHONE

All saved contents and preference setting will be reset to factory defaults.
1.
Press [Menu], then press
Press "Security". Enter your password.
• The default Lock code is the last 4 digit of your phone number.
2.
Press "Reset Phone".
3.
"All Saved Contents And Preference Setting Will Be Set To Factory
Defaults" will be shown. Press the Left Soft Key
4.
Select "Yes" or "No", then press the Left Soft Key
SETTINGS
for the "Settings" menu.
[Next].
[Save].
65