Schedule - UTStarcom CDM7026 Manual

TOOLS
CALLING USING VOICE ACTIVATED DIALING
1.
To call a number saved in your contact list, press the Voice
Command Key . You will hear and see "Please Say a
Command".
2.
After the beep, say "Call".
3.
You will hear and see "Please say a name".
4.
After the beep, say the name of contact.
5.
You will hear "Did you say [name] [phone number]" and the
contact will be displayed on screen. More than one contact may be
displayed. If the first contact is not correct, say "No". Repeat until
the correct contact is indicated. Say "Yes" if the name and phone
number are correct.
If more than one phone number exists for the contact you
•
Note
are calling, the primary number will be the one chosen for
voice activated dialing.
6.
The phone will dial the number.
INFORMATION
1.
In idle mode, press the Voice Command Key
and see "Please Say a Command".
2.
Scroll to a menu item then press the Left Soft Key
3.
Your phone displays the information to help you use that menu
item and plays it through your speaker.
78
. You will hear
[INFO].

SCHEDULE

Sets an event and reminds you of that event.
ADD NEW CALENDAR
1.
Press "Schedule".
You can also access this menu by pressing the OK Key
•
Note
[MENU].Press "Tools", then
2.
Press / / or to choose a date in the calendar, then
press the Left Soft Key [Add].
3.
The New Event screen will be displayed. Enter the event name.
Press to move to the next fields. In the Start Time field and End
Time field, enter the time. Press the Right Soft Key
PM. In the Start Date field and the End Date field, you can edit the
date for the event. In the Contents field, enter any notes for the
event. In the Notice field, enter when the alert should sound for
the event (On Time, before 10 min, before 20 min, before 30 min).
In the Snooze field, set the snooze time (5 Min, 10 Min, 15 Min, 20
Min). In the Ringer field, press the Right Soft Key
select a ringer for the event. Press the Right Soft Key
when the ringer is selected.
4.
Press the Left Soft Key [Save] to save the event or the
Clear Key to return to the calendar.
5.
The date of the event will be marked on your calendar.
TOOLS
"Schedule".
for AM or
[Change] to
[Save]
79