Speed Dials; Service Numbers - UTStarcom CDM7026 Manual

CONTACTS

SPEED DIALS

In idle mode, calls can be placed to numbers stored in speed dial by
pressing & holding the location number on the key pad. For a 2-digit
location number, press the first number, then press and hold the second
number.
• Speed Dial must be activated. See page 61 for additional information.
Note
1.
Press the OK Key [Menu],
Dials".
2.
To assign a phone number to a location, select the location then
press the Left Soft Key [Assign].
• "Location is empty" appears if the location is available.
Note
3.
Scroll to the contact in the list.
4.
If more than one number exists for the contact, press
select the phone number for the speed dial location.
The numbers will be displayed above the contact list.
5.
Press the Left Soft Key [Assign] to set the speed dial location.
38
"Contacts", then "Speed
/ to

SERVICE NUMBERS

Your Contacts list is preprogrammed with contact numbers for various
services.
1.
Press the OK Key [Menu], then press
2.
Press "Service Numbers".
3.
Select the number then press the OK Key
4.
Press the SEND Key to call.
CONTACTS
"Contacts".
.
39