Panasonic KX-TG8231 Operating Instructions Manual page 43

Problem
I cannot program items.
While programming, the
handset starts to ring.
I cannot register a handset
to a base unit.
Battery recharge
Problem
The batteries should be
charging but the battery
icon does not change.
The handset beeps
intermittently and/or )
flashes.
I fully charged the
batteries, but ) still
flashes.
I fully charged the
batteries, but the operating
time seems to be short.
The handset display is
blank.
For assistance, please visit http://www.panasonic.com/help
Cause/solution
L Programming is not possible while either the
base unit or another handset is being used. Try
again later.
L A call is being received. Answer the call and
start again after hanging up.
L The maximum number of handsets (6) is already
registered to the base unit. Cancel unused
handset registrations from the base unit (page
38).
L Place the handset and the base unit away from
other electrical appliances.
Cause/solution
L Clean the charge contacts and charge again
(page 13).
L Fully charge the batteries (page 13).
L Clean the charge contacts and charge again
(page 13).
L It is time to replace the batteries (page 12).
L Wipe the battery ends (S, T) and the unit
contacts with a dry cloth.
L The handset is in screen saver mode (page 14).
Press {OFF} to activate the handset display
again.
L Confirm that the batteries are properly installed.
L Fully charge the batteries (page 13).
Useful Information
43