Panasonic KX-TG8231 Operating Instructions Manual page 44

Useful Information
Making/answering calls, intercom
Problem
w is flashing.
w is displayed, but I
cannot make a call.
Static is heard, sound cuts
in and out. Interference
from other electrical units.
Noise is heard during a
call.
The handset does not ring.
I cannot make a call.
I cannot have a
conversation using the
headset.
I cannot make long
distance calls.
44
For assistance, please visit http://www.panasonic.com/help
Cause/solution
L The handset is not registered to the base unit.
Register it (page 38).
L The handset is too far from the base unit. Move
closer.
L The base unit AC adaptor is not connected.
Check the connections.
L You are using the handset or base unit in an
area with high electrical interference. Place the
handset and base unit away from interference
sources, such as antennas and mobile phones.
L The handset and base unit could not
communicate for some reason, such as
interference from other electrical appliances.
Perform the following:
– Move the handset and base unit away from
other electrical appliances.
– Move closer to the base unit.
L Place the handset and the base unit away from
other electrical appliances.
L Move closer to the base unit.
L If your unit is connected to a telephone line with
DSL service, we recommend connecting a noise
filter between the base unit and the telephone
line jack. Contact your DSL provider for details.
L You are using the handset or base unit in an
area with high electrical interference. Place the
handset and base unit away from interference
sources, such as antennas and mobile phones.
L The ringer volume is turned off. Adjust the ringer
volume (page 27).
L The dialing mode may be set incorrectly.
Change the setting (page 15).
L Another handset is in use or the answering
system is being used. Wait and try again later.
L Make sure that an optional headset is
connected properly (page 40).
L Make sure that you have long distance service.