Error Messages - Panasonic KX-TG8231 Operating Instructions Manual

Error messages

If the unit detects a problem, one of the following messages is shown on the display.
Display message
Busy
Error!!
Failed
Incomplete
Memory full
Messages full
No items stored
No link to base.
Move closer to base,
try again.
Please lift up and
try again.
You must first
subscribe to Caller
ID.
For assistance, please visit http://www.panasonic.com/help
Cause/solution
L The called handset is in use.
L The handset you are calling is too far from the
base unit.
L There is no handset registered to the base unit
matching the extension number you entered.
L Other units are in use and the system is busy. Try
again later.
L Recording was too short. Try again.
L Phonebook copy failed. Confirm the other
handset (the receiver) is in standby mode and try
again.
L The receiver's phonebook memory is full. Erase
the unnecessary phonebook entries from the
other handset (the receiver) and try again.
L The handset's phonebook memory is full. Erase
unnecessary entries (page 20).
L Message memory becomes full. Erase
unnecessary messages (page 31).
L Your phonebook, caller list or redial list is empty.
L The handset has lost communication with the
base unit. Move closer to the base unit and try
again.
L Unplug the base unit's AC adaptor to reset the
unit. Reconnect the adaptor and try again.
L The handset's registration may have been
canceled. Re-register the handset (page 38).
L A handset button was pressed while the handset
was on the base unit or charger. Lift the handset
and press the button again.
L You must subscribe to Caller ID service. Once
you receive caller information after subscribing to
Caller ID service, this message will not be
displayed.
Useful Information
41