Voice Prompt *1; Set Dial Mode *1; Voice Guidance Language; Dialing Mode - Panasonic KX-TG8231 Operating Instructions Manual

Voice guidance language

You can select either "English" or
"Español" as the voice guidance
language of the answering system
(page 30). The default setting is
"English".
1
{MENU} (center of joystick)
2
Select I by pushing the joystick in
any direction. i {SELECT}
3
Push the joystick up or down to
select "Settings". i {SELECT}
4
Push the joystick up or down to
select "Voice prompt". i
{SELECT}
5
Push the joystick up or down to
select the desired language. i
{SAVE} i {OFF}

Dialing mode

If you cannot make calls, change this
setting according to your telephone line
service. The default setting is "Tone".
"Tone": For tone dial service.
"Pulse": For rotary/pulse dial service.
1
{MENU} (center of joystick)
2
Select * by pushing the joystick in
any direction. i {SELECT}
3
Push the joystick up or down to
select "Set tel line". i
{SELECT}
4
Push the joystick up or down to
select "Set dial mode". i
{SELECT}
5
Push the joystick up or down to
select the desired setting. i
{SAVE} i {OFF}

Date and time

Set the correct date and time so that:
– You can use the alarm function (page
28).
For assistance, please visit http://www.panasonic.com/help
– The unit will announce the day and
time a message was recorded when
you play back on the answering
system (page 31).
1
{MENU} (center of joystick)
2
Select K by pushing the joystick in
any direction. i {SELECT}
3
Push the joystick up or down to
select "Date and time". i
{SELECT}
4
Enter the current month, date, and
year.
Example: August 15, 2007
{0}{8} {1}{5} {0}{7}
5
Enter the current hour and minute
(12-hour clock format).
Example: 9:30
{0}{9} {3}{0}
6
Press {*} to select "AM" or "PM".
7
{SAVE} i {OFF}
Note:
L When English is selected as the
display language, 12-hour clock
format is used. When Spanish is
selected, 24-hour clock format is
used.
L If you make a mistake when entering
the date and time, push the joystick
right, left, up, or down to move the
cursor, then make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
Preparation
15