Multi-Unit Operation; Intercom - Panasonic KX-TG5971AL Operating Instructions Manual

Multi-unit Operation

Intercom

Intercom calls can be made:
– between the handset and base unit
– between handsets
Note:
L If you receive an outside call while
talking on the intercom, you hear 2
tones. To answer the call with the
handset, press {OFF}, then press {C}.
To answer the call with the base unit,
press {SP-PHONE} 2 times.
L You can locate a misplaced handset by
paging it (handset locator).
Making an intercom call
Handset
1
{INTERCOM}
2
Select the desired unit. i {CALL}
L The destination unit beeps for 1
minute.
L To stop paging, press {OFF}.
3
When you finish talking, press {OFF}.
Note:
L If a USB adaptor (KX-TGA595AL) is
registered to the base unit, its extension
number is not displayed on the handset.
L If a cordless camera (KX-TGA593AL) is
registered to the base unit, its extension
number is not displayed on the
monochrome display models (KX-
TGA590AL).
62
Base unit
1
{INTERCOM}
2
To page a specified handset, enter its
extension number ({1} – {8}).
To page all handsets, press {0}.
L The destination unit(s) beeps for 1
minute.
L To stop paging, press {INTERCOM}.
3
When you finish talking, press {SP-
PHONE}.
Answering an intercom call
Handset
1
Press {C} or {s} to answer the page.
2
When you finish talking, press {OFF}.
Base unit
1
Press {SP-PHONE} or {INTERCOM}
to answer the page.
2
When you finish talking, press {SP-
PHONE}.
Note for handset and base unit:
L When the ringer volume is set to off, the
handset or the base unit rings at the low
level for intercom calls.