Preparation; Setting Up The Base Unit - Panasonic KX-TG5971AL Operating Instructions Manual

Preparation

Setting up the base unit

Connecting the AC adaptor and
telephone line cord
Connect the telephone line cord until it
clicks into the base unit (A) and telephone
line socket (B). Connect the AC adaptor
cord by pressing the plug firmly (C).
L Use only the included Panasonic AC
adaptor PQLV207AL.
Note:
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
L The AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
L The unit will not work during a power
failure. We recommend connecting a
corded telephone to the same telephone
14
C
Hook
A
To socket
B
(230-240 V AC,
50/60 Hz)
line or to the same telephone jack using
a T-adaptor (page 9).
If you subscribe to an ADSL service
Please attach a noise filter (contact your
DSL provider) to the telephone line
between the base unit and the telephone
line socket in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 36) do not
function properly.
Noise filter
To socket