Multi-unit User Operation
Handset Registration
The handset supplied with the base unit is already registered. If an optional handset is
purchased, it must be registered. Additional KX-A142E handsets are available to
purchase separately. Up to 6 handsets can be registered to a single base unit. Using
additional handsets allows you to have an intercom call while simultaneously conducting
a call to an outside line.
Handset must be registered within 1 minute after pressing PAGE button. If over 1
minute, press
Charge the optional handset batteries for 7 hours before initial use.
1
Press MENU.
4
5
Press
RIGHT.*1
6
Search/Select desired
base unit number
available to register
the handset.
•
To exit the operation, press
*1 If a handset has been already registered to 4 base units, "MEMORY FULL" is
displayed.
28
: Handset Registration to a Base Unit
then start over again.
2
Search/Select
"SETTING HS".
Press and hold
(for about 10 seconds) until the green indicator flashes.
If all registered handsets start ringing (Paging),
press
to stop paging then start over again.
7
4-digit Base
Unit PIN after
"BS PIN"
displayed.
Factory preset 0000
any time.
3
Search/Select
"REGISTRATION".
on the Base Unit
8
Press OK.
is
"REGISTER HS"
When a handset is
registered successfully,
a confirmation tone
sounds and "
"
icon lights.