Canon VB-R13VE Operation Manual page 201

Select whether an ON event or OFF event triggers a linked event in [Status].
[External Device Input]
Select External Device Input 1 or 2 in [External Device Input], and then select an active event or inactive event to
trigger a linked event in [Status].
[Timer]
Select the timer event number to use in [Timer].
[Intelligent Function]
Select the Intelligent Function detection setting number (P. 176) to use in [Intelligent Function], then select whether
an ON event or OFF event triggers a linked event in [Status].
Note
You cannot set the same event type for [Event 1] and [Event 2]. However, a combination of [Input 1] and [Input 2] can be specified
for [External Device Input] and a combination of [Timer 1] to [Timer 4] can be set for [Timer].

Operation
Set the operations to be performed when linked events are triggered.
[ON Event Operation]
If [Enable] is set, [Preset]
settings when a linked event (ON event) is triggered.
[OFF Event Operation]
If [Enable] is set, [Preset]
settings when a linked event (OFF event) is completed.
[Ongoing ON Event Operation]
Select the operations to be performed when an ON event is triggered.
If [Enable] is selected, [Video Record] and [E-mail Notification] will be executed according to their settings during the
linked event.
R13 M50
[Preset]
If you specify a preset, the camera angle will automatically move to the preset location when a linked event is
triggered.
It is necessary to set presets beforehand with [Camera] > [Preset] (P. 131).
R13 M50
Note
[Preset] cannot be configured when [Intelligent Function] is included in [Event Type].
[Video Record]
Select whether to record video depending on the linked event.
If you select [Enable] and a linked event is triggered, video will be transmitted to the recording destination specified
in [Video Record] > [Upload] > [Video Record Action] (P. 156).
[E-mail Notification]
Select whether to send an e-mail notification depending on the linked event.
If you select [Enable] and a linked event is triggered, an e-mail notification will be sent.
To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 160) beforehand.
[External Device Output for ON Event]
Select whether external device output (1 or 2) is active or inactive when an ON event is triggered.
[External Device Output for OFF Event]
Select whether external device output (1 or 2) is active or inactive when an OFF event is triggered.
[Audio Playback at ON Event]
If you select [Enable], the sound clip specified in [Sound Clip] will play back when a linked event is triggered.
[Audio Playback at OFF Event]
If you select [Enable], the sound clip specified in [Sound Clip] will play back when a linked event completes.
Note
[Audio Playback at ON Event] and [Audio Playback at OFF Event] can only be set when [Event Type] in [Event 1] and [Event 2] is
set to [External Device Input] or [Intelligent Function].
R13 M50
, [Video Record] and [E-mail Notification] will be executed according to their
R13 M50
, [Video Record] and [E-mail Notification] will be executed according to their
5
201