[Basic] > [Video]; Setting Video Size And Quality; All Videos - Canon VB-R13VE Operation Manual

Hide thumbs Also See for VB-R13VE:
Table of Contents

Advertisement

[Basic] > [Video]

Setting Video Size and Quality

General video settings, such as the size and quality of JPEG and H.264 video transmitted from the camera.
[Video] is common with [Video] found in [Video and Audio] and [Video Record]. A setting configured in any of the [Video]
submenus will be reflected in the other [Video] submenus as well.
Important
• The following may occur if video size, video quality and target bit rate are set higher, as this increases network load and data size per
frame.
– JPEG: The frame rate may drop
– H.264: Video may be temporarily disrupted
• In case of H.264 video, block noise may become noticeable if a large video size and low target bit rate are set.
• The data size may increase depending on the type or movement of the subject. If the frame rate remains low or other undesirable
conditions continue for a prolonged period, lower the video size or quality setting.
• The included RM-Lite can only record JPEG video.

All Videos

Set the video size sets used by the camera.
All options in the [Video] submenu and the size sets that can be selected in [Video Size] in all of the Setting Pages are
determined by the video size set selected here.
This also determines the video sizes and screen sizes that can be selected by each Viewer.
[Video Size Set]
Categories and aspect ratios vary according to each video size set.
M50
[Video Size Set]
[1280 x 720 / 640 x 360 / 320 x 180]
[1280 x 960 / 640 x 480 / 320 x 240]
104
The following settings can be configured here.
• All Videos
• JPEG
• H.264(1)
• H.264(2)
Category
720p
4:3
Aspect Ratio
16:9
4:3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vb-r13Vb-r12veVb-h651vVb-m50bVbh652lve

Table of Contents