Vehicle Identification Number (Vin); Additional Pneumatic Springs - Hobby 65TL Siesta TI Manual

3.5 Vehicle Identification Number (VIN)

The 17-digit Vehicle Identification Number is engraved in the
right front side wheel arch. To improve readability the VIN is
repeated on a label to the left of the instrument panel and is
legible from outside the vehicle. In addition to this, the VIN is
given on both the Ford model plate (on the B-pillar, passen-
ger side) and on the Hobby model plate (in the engine com-
partment, at the front on the radiator bridge). Please have the
VIN to hand when making any enquiries and on every visit to
your dealer.

3.6 Additional pneumatic springs

(Optional Extra)
Additional pneumatic springs on the rear axle provide a signi-
ficant improvement to the motor home's road handling and
complement the standard suspension. The air bellows lift the
vehicle's tail as required.
The compressor is activated from the driver's cabin ope-
rating panel using the On/Off button
bellows with air. The manometer
continuous information regarding the current pressure in the
system. Should excess pressure occur the excess air can be
released from the system using the ventilation button
Chassis
1
2
3
j , thereby filling the
l can be used to provide
k
.
03-6