Table of Contents
Advertisement
09-5
Gas
Changing gas cylinders
Do not smoke or ignite open flames while changing the gas
cylinders. After changing the gas bottles, check whether
there is any gas escaping from the tie-in point by spraying it
with leak detection spray.
• Open the door of the gas bottle cabinet.
• Close the main stop valve on the gas cylinder. Pay attenti-
on to the direction of the arrow.
• Unscrew the gas pressure regulator with the gas hose by
hand from the gas bottle (left-handed thread).
• Loosen the fixing strap and remove the gas cylinder.
• Replace the full gas cylinder in the gas bottle cabinet and
carefully fasten it using the fixing straps.
• Screw the gas pressure regulator with the gas hose by
hand on to the gas bottle (left-handed thread).
• Check that gas is not escaping from the connection point
using leak detector spray.
• Close the gas bottle cabinet door.
Gas stop valves
Every gas device is fitted with a corresponding gas stop
valve. The gas stop valves are located in the kitchen drawer
above the cutlery tray (AK) or in the bottom kitchen drawer
(TI). They have been marked with the corresponding symbols.
Hide quick links:
Advertisement
Table of Contents
