Hobby 65TL Siesta TI Manual page 110

Changing a gas bottle
Please use the enclosed screw aid to screw and unscrew
the hose. It ensures the necessary tightening torque.
• Open the door of the gas bottle container.
• Close the main shutoff valve on the gas bottle, noting the
direction of the arrow.
• Unscrew the high-pressure hose from the gas bottle.
• Release the fastening straps and take out the gas bottle.
• Place a full gas bottle back in the gas bottle container and
use both fastening straps to lash it securely.
• Screw the high-pressure hose to the full gas bottle.
• Open the valve on the full gas bottle.
• Press the hose rupture protection (see: To operate)
• Check whether there is any gas escaping from the tie-in
points by spraying them with leak detection spray.
• Close the door of the gas bottle container.
Gas 09-8