Table of Contents
Advertisement
Error messages on the display
DISPLAY MESSAGE
PC FAIL OR BUSY
PLEASE WAIT
POLLING ERROR
REDIAL TIME OUT
REMOVE DOCUMENT
REMOVE PRINTOUT
STARTER FILM END
TRANSMIT ERROR
UNIT OVERHEATED
90
¡The fax function cannot be operated on the PC. The RS232C cable is not
connected correctly, or the software is not running on the PC.
¡The unit is checking if the film is set correctly. Wait for a while.
¡The other fax machine does not have a polling feature. Check with the other
party.
¡The receiving unit is busy or ran out of recording paper. Try again.
¡The document is jammed. Remove the jammed document (p. 98).
¡Attempted to transmit a document longer than 600 mm (23
button and remove the document (p. 98).
Divide the document into two or more sheets and try again.
¡There is too much paper on the paper stacker. Remove the printed paper. If the
display message still remains after removing the paper, a paper jam may have
occurred. Remove the jammed paper (see "When paper has jammed near the
recording paper exit" on page 97).
¡The starter film is empty. Replace the film or film cartridge with a new one
(p. 99, 100).
¡A transmission error occurred. Try again.
¡The unit is too hot. Let it cool down.
(cont.)
CAUSE & REMEDY
5
⁄
w). Press the STOP
8
Advertisement
Table of Contents
