Table of Contents
Advertisement
TEL/FAX mode
(automatic voice and fax recognition)
Use this mode when you wish to receive voice calls with rings, but do not want to hear the unit ring when
faxes are received.
When a call is received, the unit will work as follows:
The unit will automatically answer the line without ringing.
(At this point, a telephone fee will be charged to the caller.)
¡If a TEL/FAX greeting message is recorded (see page 43), it will be played to the caller.
If extension telephones are connected, only they will ring before the call is answered. \
The unit will now distinguish between a voice and fax call by detecting the calling tone.
The unit will receive a document.
Silent ring fax recognition system
\ Regarding the ringing pattern of extension telephones and the facsimile unit, see "Helpful hints
when using the TEL/FAX mode" on the next page.
Note:
¡Some fax messages that are transmitted manually may not send a calling tone. These calls must be received
manually.
30
A call is received.
Fax call
Voice call
The unit will start to ring. \
¡While ringing, the unit will emit a
different ring-back-tone to the calling
party.
Answer the call using the speakerphone
or the handset.
¡If you do not answer the call by a
preset number of rings, the facsimile
unit will switch to the fax.
Advertisement
Table of Contents
