Table of Contents
Advertisement
Transmitting documents
1
Open the document feeder tray.
2
Insert the documents FACE DOWN (up to
15 sheets) until a beep tone is heard.
3
Adjust the document guides to the width of the
document.
Press (RESOLUTION) repeatedly to the desired
4
setting, if needed (see page 18).
Press (DIGITAL\SP-PHONE) or lift the handset.
5
6
Dial the telephone number.
¡If you misdial, hang up and dial again.
7
When a fax tone is heard, press
(START/COPY/SET).
8
Hang up the handset if using it.
Note:
¡If the other party answers your call, ask them to start
receiving a fax, then press your (START/COPY/SET).
To stop transmission
Press (STOP).
¡To eject the document, press (STOP) again.
Fax voice guidance about
transmission
After transmission, one of the following messages
will tell you the result.
—Transmission is complete.
—Transmission has failed.
—Transmission has been interrupted.
You can set this feature to OFF and the guidance
will not be heard. Or you can set this feature to
ERROR and the guidance will prompt you only
when fax transmission fails (see page 65).
20
For Assistance, Call 1-800-435-7329
Document
feeder tray
Dial keypad
FACE DOWN
(DIGITAL\SP-PHONE)
(STOP)
(START/COPY/SET)
Document guides
(RESOLUTION)
Advertisement
Table of Contents
