Table of Contents
Advertisement
Replacing the film or film cartridge
15
Insert the blue gear into the blue core of the
new film.
16
Insert the three green gears into the remaining
cores of the new film.
17
Insert the film into the cartridge so that the blue
gear matches the blue label on the cartridge.
18
Lock the four gears of the film by (A) pushing
back the top side gears and (B) pulling the
bottom side gears forward until they lock into
place.
¡If the film is slack, tighten it by winding the
bottom side gears.
19
Insert the film cartridge by matching the blue
label on the cartridge with that on the unit.
10
Close the front cover securely by pushing down
on both ends.
¡The unit will check that the film is set correctly
and the following message will be displayed:
Display:
¡If the following message is displayed, the film
is not inserted correctly:
¡Reinsert it correctly.
100
Incorrect
Correct
tight
PLEASE WAIT
CHECK FILM
(cont.)
Blue core
Guide tabs
Guide tabs
Blue label
Blue gear
Cartridge
Top side
Bottom
gears
side gear
Bottom
side gears
Blue labels
Film
cartridge
Blue gear
Slots
Green gears
Slots
Film
Top side gear
B
A
Advertisement
Table of Contents
