Table of Contents
Advertisement
Operating Grill Module
WARNING
To avoid risk of serious personal injury, property
damage, or fire, do not leave grill unattended while in
operation. Grease and spillovers can ignite causing a
fire.
CAUTION
To avoid risk of property damage, do not use metal
cooking utensils on grill.
1. Before operating grill module, lightly coat top of grill
grates with cooking oil to prevent sticking.
2. Trim excess fats from meats.
3. Push in and turn right front control knob to LITE
position.
4. After right side module burner ignites, turn control to
desired setting.
5. Push in and turn the right rear control knob to LITE
position.
6. After left side module burner ignites, turn control to
desired setting.
• Fan automatically comes on at low speed.
7. Preheat grill for approximately 10 minutes to improve
charbroiled flavor and to decrease food sticking.
8. When finished cooking, turn control knob to OFF
position.
9. Wait 15 minutes for grill pan and grill accessories to
cool before cleaning.
Installing Griddle
Griddle must be installed in right module reservoir.
WARNING
To avoid risk of personal injury, all controls must be in
off position before removing or installing modules.
1. Turn all control knobs to OFF position.
2. Remove grill grates from grill module.
3. Insert grease pan and grill module according to
Installing Grill Module section.
4. Place griddle pan on top of grill module with grease
trap toward front of range. Do not place griddle on
grill grates.
16
Advertisement
Table of Contents
