Table of Contents
Advertisement
Electronic Oven Control Pads
OVEN CANCEL
• Cancels any cooking or cleaning function except
timer.
MIN. TIMER ON/CANCEL
• Use to time any kitchen function or cancel timer.
• Does not control bake, broil, or clean function.
CLOCK
• Use to set time of day.
STOP TIME
• Use to set delayed bake and self-clean.
COOK TIME
• Use to set timed baking.
CLEAN
• Use to select self-clean cycle.
BROIL
• Use to select broil.
BAKE
• Use to select bake.
OVEN LIGHT
Used to turn oven light on and off.
Light automatically turns on when
oven door is opened.
TIME/TEMP SET
Used to select temperature or time.
Oven Signals
Preheat Signal — After setting oven to bake and selecting
a temperature, oven preheats. When oven reaches set
temperature, 1 second signal sounds.
End of Cycle Signal — When a timed cooking or cleaning
cycle is complete, three long signals sound. End of cycle
signal continues to sound until OVEN CANCEL pad is
pushed.
If minute timer end of cycle signal is sounding push
MIN. TIMER ON/CANCEL pad.
12 Hour Automatic Cancel — This is a safety feature that
prevents oven from continuing to operate if it has been left
on for over 12 hours. If a cooking function continues longer
than 12 hours without any options on oven control being
touched, this feature turns oven off. Any time an option is
touched, 12 hour automatic cancel is reset.
Baking
1. Push BAKE pad.
• Last baking temperature used is displayed.
2. Turn TIME/TEMP SET knob until desired temperature
is displayed.
• Temperature can be set from 170° to 550°F.
Preheat approximately 10 minutes before placing
food inside oven.
• Temperature display increases in 5°F increments
starting at 100
O
Some minor smoking is normal when using oven
for first time.
3. Push OVEN CANCEL pad when finished.
• Remove food from oven when cooking time has
elapsed. Food left in oven may overcook.
Automatic Baking
1. Place food in oven.
2. Push COOK TIME pad.
3. Turn TIME/TEMP SET knob until amount of time food
should cook is displayed. Time can be set up to 11
hours and 55 minutes.
4. Push BAKE pad.
• Last baking temperature used is displayed.
5. Turn TIME/TEMP SET knob until desired temperature
is displayed.
• When oven begins cooking, "STOP","TIME",
"BAKE", and "ON" light in display. Set cooking time
counts down in display. When cooking time has
elapsed, an end of cycle signal sounds, oven
automatically turns off and display returns to time
of day. End of cycle signal continues to sound until
OVEN CANCEL pad is pressed.
6. Push OVEN CANCEL pad when finished.
• Remove food from oven when cooking time has
elapsed. Food left in oven may overcook.
20
until reaching set temperature.
Advertisement
Table of Contents
