Table of Contents
Advertisement
Quick Links
INSTALLATIONINSTRUCTIONS
20" (50.8 CM) FREESTANDING GAS RANGE
withStandard Clean Oven
TableofContents
RANGE SAFETY .............................................................................
2
INSTALLATION REQUIREMENTS
...............................................
4
Tools and Parts ............................................................................
4
Location Requirements ...............................................................
4
Gas Supply Requirements ..........................................................
6
INSTALLATION
INSTRUCTIONS .................................................
7
Unpack Range .............................................................................
7
Install Anti-Tip Bracket ................................................................
7
Make Gas Connection .................................................................
8
Verify Anti-Tip Bracket Is Installed and Engaged ....................... 9
Level Range ...............................................................................
10
Check Operation .......................................................................
10
Check Operation of Oven/Broil Burner .....................................
10
Complete Installation .................................................................
11
GAS CONVERSIONS ...................................................................
12
LP Gas Conversion ....................................................................
12
Pilot and Bypass Screws Conversion .......................................
14
Complete Conversion ................................................................
14
Natural Gas Conversion ............................................................
14
Pilot and Bypass Screws Conversion .......................................
16
Complete Conversion ................................................................
16
iMPORTANT:
Save for local inspector's use.
Installer:
Leave installation instructions with the homeowner.
Homeowner:
Keep installation instructions for future reference.
W10459120A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Amana AGP200VDW1
Summary of Contents for Amana AGP200VDW1
- Page 1 INSTALLATIONINSTRUCTIONS 20" (50.8 CM) FREESTANDING GAS RANGE withStandard Clean Oven TableofContents RANGE SAFETY ................INSTALLATION REQUIREMENTS ..........Tools and Parts ................Location Requirements ............... Gas Supply Requirements ............INSTALLATION INSTRUCTIONS ..........Unpack Range ................Install Anti-Tip Bracket ..............Make Gas Connection ..............Verify Anti-Tip Bracket Is Installed and Engaged .......
-
Page 2: Range Safety
RANGE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER"... - Page 3 In the State of Massachusetts, the following installation instructions apply: [] Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. [] If using a ball valve, it shall be a T-handle type. [] A flexible gas connector, when used, must not exceed 3 feet.
-
Page 4: Installation Requirements
INSTALLATION REQUIREMENTS t'oo s Gather the required tools and parts before starting installation. IMPORTANT: Observe all governing codes and ordinances. not obstruct flow of combustion and ventilation air. Read and follow the instructions provided with any tools listed here. • It is the installer's responsibility to comply with installation Tools needed... -
Page 5: Installation Instructions
Cabinet Dimensions Product Dimensions Freestanding Range Cabinet opening dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm) countertop height. If the cabinet depth is greater than 24" (61.0 cm), oven frame must extend beyond cabinet fronts by 1/2"(1.3 cm) minimum. - Page 6 Flexible metal appliance connector: If local codes permit, a new CSA design-certified, 4-5 ft (122-152.4 cm) long, 1/2"(1.3 cm) or 3A,,(1.9 cm) I.D., flexible metal appliance connector may be used for connecting range to the gas supply line. • A 1/2"(1.3 cm) male pipe thread is needed for connection Explosion Hazard to the female pipe threads of the inlet to the appliance Use a new CSA international...
-
Page 7: Install Anti-Tip Bracket
Burner Input Requirements Gas Supply Pressure Testing Input ratings shown on the model/serial rating plate are for Gas supply pressure for testing regulator must be at least 1" elevations up to 2,000 ft (609.6 m). water column pressure above the manifold pressure shown on the model/serial rating plate. - Page 8 Determine and mark centerline of the cutout space. The mounting can be installed on either the left side or right side of the cutout. Position mounting bracket against the wall in the cutout so that the V-notch of the bracket is 77/8 '' (20 cm) from centerline as shown.
- Page 9 Use a combination wrench and pliers to attach the flexible 4. Test all connections by brushing on an approved noncorrosive leak-detection solution. Bubbles will show a connector to the adapters. Check that connector is not kinked. leak. Correct any leak found. 5.
- Page 10 Repeat steps 1 and 2 to ensure that the range foot is Slowly lower the cooktop until it snaps into position. engaged in the anti-tip bracket. Push in and turn each surface burner control knob to the "HI" If the rear of the range lifts more than 1/2" (1.3 cm) off the floor position.
- Page 11 Remove the fasteners holding the flame spreader. Lift and Open oven door and remove oven racks, oven bottom tray, pull out the flame spreader. flame spreader and set aside. A. Oven bottom tray A. Oven bottom tray B. Fasteners B. Fasteners C.
- Page 12 GAS CONVERSIONS Explosion Hazard Use a new CSA International approved gas supply line. instal a shut=off valve. Securely tighten all gas connections. Tip Over Hazard if connected to LP, have a qualified person make sure A child or adult can tip the range and be killed. gas pressure does not exceed 14"...
- Page 13 Remove the cap from the gas pressure regulator using a 7. Remove the natural gas orifice spuds from the valve using a flat-blade screwdriver. 3/8"(9.5 mm) combination wrench. NOTE: Do not remove the spring beneath the cap. A. Cap Turn the cap over so the LP is visible. A.
-
Page 14: Make Gas Connection
12. Install the LP gas pilot screw with a flat-blade screwdriver, turning clockwise. Byp sss 13. Replace the front panel and screw bottom and top fasteners Remove control knobs and set aside. in place. Remove upper grates. 14. Replace the control knobs. Slowly lower the cooktop until it Lift the cooktop by both front corners and hold it by the front snaps into position. - Page 15 3. Remove the screws that attach each dual burner. Open broiler door and remove broiler pan. The gas pressure regulator is located in the back right hand corner of the broiler 4. Lift each burner and slip it back to remove it. compartment.
- Page 16 6. Place LP gas oven burner spud in plastic parts bag along Remove the LP gas bypass screw with a flat-blade with LP gas cooktop burner spuds for future use and keep screwdriver, turning counterclockwise. with the bag containing literature. 7.
Need help?
Do you have a question about the AGP200VDW1 and is the answer not in the manual?
Questions and answers