Table of Contents
Advertisement
CONTRAST
(Analog input only)
BLACK LEVEL
(Analog input only)
Tag5
H.POSITION
V.POSITION
H.SIZE
(Analog input only)
FINE
(Analog input only)
H.RESOLUTION
V.RESOLUTION
EXPANSION
SIDE BORDER
COLOR
Tag6
VIDEO DETECT*
*1 This item does not reset by FACTORY PRESET (Tag7).
Adjusts the image brightness and contrast in relation to the background.
Press "LEFT" or "RIGHT" to adjust.
Adjusts the RGB black level by input signal level.
Controls Horizontal Image Position within the display area of the LCD.
Press "LEFT" or "RIGHT" to adjust.
Controls Vertical Image Position within the display area of the LCD.
Press "LEFT" or "RIGHT" to adjust.
Adjusts the horizontal size of the screen.
If the "AUTO ADJUST" function do not give you a satisfactory picture setting, a further
tuning can be performed using the "H.SIZE (V.SIZE)" function (dot clock). For this a Moiré
test pattern could be used. This function may alter the width of the picture. Use LEFT/
RIGHT Menu to center the image on the screen. If the H.SIZE (V.SIZE) is incorrectly
calibrated, vertical bands will appear. The image should be homogeneous.
Improve focus, clarity and image stability by increasing or decreasing this setting.
If the "AUTO ADJUST" function and the "H.SIZE" function do not give you a satisfactory
picture setting, a fi ne tuning can be performed using the "FINE" function. For this a Moiré
test pattern could be used. If the Fine value is incorrectly calibrated, horizontal lines will
appear on the display. The image should be homogeneous.
Adjusts the horizontal size by increasing or decreasing the setting.
Press "RIGHT" button to expand the width of the image on the screen.
Press "LEFT" button to narrow the width of the image on the screen.
Adjusts the vertical size by increasing or decreasing the setting.
Press "RIGHT" button to expand the height of the image on the screen.
Press "LEFT" button to narrow the height of the image on the screen.
Sets the zoom method.
FULL: The image is expanded to full screen, regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF: The image is not expanded.
Adjusts the side black bars color between black and white.
1
Selects the method of video detection when more than one computer is connected.
Press "LEFT" or "RIGHT" to select.
FIRST: When current video input signal is not present, then the monitor searches for a
video signal from the other video input port(s). If the video signal is present in another
port, then the monitor switches the video source input port to the new found video source
automatically. The monitor will not look for other video signals while the current video source
is present.
LAST: When the monitor is displaying a signal from the current source and a new
secondary source is supplied to the monitor, then the monitor will automatically switch to
the new video source. When current video input signal is not present, then the monitor
searches for a video signal from the other video input port. If the video signal is present
in another port, then the monitor switches the video source input port(s) to the new found
video source automatically.
NONE: The Monitor will not search the other video input port unless the monitor is
turned on.
English-21
Advertisement
Table of Contents
